Kit de suspensión completo — horquilla + amortiguador
Price
$1,990.00
● In stock
Quantity
Envío en 3 días laborables. Incluye guía de setup y tabla de muelles.
Sobre este artículo
The complete FASTACE suspension kit pairs our front fork and rear shock — both pre-tuned to your weight and riding style — for a single bike platform. Kit pricing is meaningfully better than buying the components separately.
Both components ship with matched damping curves so the front and rear behave consistently under braking, acceleration and impact. This is the package most of our race-team customers run.
Características
- FASTACE front fork + rear shock, matched damping curves
- Both pre-tuned to your weight, gear and primary terrain
- Direct-fit hardware included (no adapters needed)
- Set-up sheet with rebound, compression and sag baselines for your bike
- Free email tech support for the life of the product
Especificaciones
- Includes
- 1× front fork, 1× rear shock, install hardware
- Fork travel
- 220 mm
- Shock travel
- 240 mm (at wheel)
- Combined weight
- 6.45 kg
- Damping match
- Front + rear curves verified together
- Warranty
- 24 months on both components
Montaje
Ajuste directo en estas motos — sin adaptadores, sin hardware propietario.
Sur-Ron Light Bee
More control on hard hits fork · MORE ROOM FOR BIG IMPACTS shock
Sur-Ron Ultra Bee
More control on hard hits fork · MORE ROOM FOR BIG IMPACTS shock
Talaria Sting
More control on hard hits fork · MORE ROOM FOR BIG IMPACTS shock
Talaria XXX
More control on hard hits fork · MORE ROOM FOR BIG IMPACTS shock
E-Ride Pro SS
More control on hard hits fork · MORE ROOM FOR BIG IMPACTS shock
Selección de tasa de muelle
Pre-instalado según tu peso al pedir. Usa esta tabla si cambias el muelle más adelante.
| Peso del piloto (con equipo) | Tasa recomendada | Caso de uso |
|---|---|---|
| 60–75 kg | Soft fork + 400 lb/in shock | |
| 75–90 kg | Medium fork + 450 lb/in shock | Default |
| 90–105 kg | Firm fork + 500 lb/in shock | |
| 105 kg+ | Race fork + 550–600 lb/in shock |
Ajuste e instalación
La mayoría de instalaciones tardan 40–60 minutos con herramientas estándar de taller moto. Las instrucciones completas se entregan con el producto.
Install the front fork following the fork install procedure.
Install the rear shock following the shock install procedure.
Set front sag (25–30 mm) and rear sag (30–40 mm) with rider in full gear.
Apply the supplied baseline rebound and compression settings; ride 30 minutes on a familiar trail.
Adjust one click at a time per ride session — never change more than one variable at once.
Mantenimiento
- Service both components on the same interval to keep damping curves matched.
- Always re-check sag after a fork or shock service.
- Email support@fastace.bike with photos / video of any rebound or compression changes you can't dial in.
Preguntas frecuentes
Q01Why buy the kit instead of separate components?
Two reasons: kit pricing saves you a meaningful amount versus buying separately, and our factory matches the damping curves of the fork and shock as a pair.
Q02Can I install it myself?
Yes, if you've replaced a fork or shock before. Otherwise, any moto shop with basic suspension experience can install in under 2 hours.
Q03Do I get a setup sheet with the kit?
Yes — we include a printed sheet with rebound, low/high-speed compression and sag baselines for your specific bike model and weight class.
Q04Is the kit warranty different from individual components?
No — both the fork and the shock are covered by the same 24-month warranty as if you'd bought them separately.
¿Necesitas una recomendación de ajuste?
Envíanos un clip de vídeo de tu terreno y tu peso; te responderemos con un ajuste inicial.