
FRONT FORK
Price
$1,290.00
● In stock
Quantity
50 / 60 lbs spring options. Compression and rebound adjustable. Direct bolt-on fit.
Built for electric dirt bikes that demand more than what a stock fork can deliver. The FASTACE front fork uses a twin-tube cartridge with externally adjustable compression and rebound damping, paired with a coil spring sized to your weight at the order stage.
Internally, every fork is dyno-tested and shimmed before it leaves our shop. The result is a fork that feels supple over chatter, holds up under repeated impacts on rocky descents, and never packs down on the kind of long, fast trails our test riders run weekly.
Direct-fit on the bikes listed below — no adapter brackets, no proprietary hardware. Most installs take 40–60 minutes with standard moto shop tools.
Montage direct sur ces motos — pas de supports d'adaptation, pas de matériel propriétaire.

Sur-Ron Light Bee
More control on hard hits fork · MORE ROOM FOR BIG IMPACTS shock

Sur-Ron Ultra Bee
More control on hard hits fork · MORE ROOM FOR BIG IMPACTS shock

Talaria Sting
More control on hard hits fork · MORE ROOM FOR BIG IMPACTS shock

Talaria XXX
More control on hard hits fork · MORE ROOM FOR BIG IMPACTS shock

E-Ride Pro SS
More control on hard hits fork · MORE ROOM FOR BIG IMPACTS shock
Pré-installé pour correspondre à votre poids lors de la commande. Utilisez ce tableau si vous changez de ressort plus tard.
| Poids du pilote (avec équipement) | Taux recommandé | Cas d'utilisation |
|---|---|---|
| 60–75 kg | Soft (4.5 N/mm) | Trail riding, lighter rider |
| 75–90 kg | Medium (5.0 N/mm) | Most riders, default option |
| 90–105 kg | Firm (5.5 N/mm) | Aggressive enduro, heavier rider |
| 105 kg+ | Race (6.0 N/mm) | Race / DH — contact us for valving |
La plupart des installations prennent 40 à 60 minutes avec des outils standards de moto. Des instructions complètes sont envoyées avec le produit.
Loosen and remove the front wheel and brake caliper.
Slacken the upper and lower triple-clamp pinch bolts; slide the original fork out.
Slide the FASTACE fork up through the lower clamp until the top of the stanchion is flush with the upper clamp; torque pinch bolts in the order specified by your bike manufacturer.
Reinstall the brake caliper and front wheel.
Set static sag to 25–30 mm with rider in full gear; adjust preload via the air spring or external collar.
Set rebound to 12 clicks from fully closed; adjust low-speed compression to 10 clicks from closed as a starting point.
This fork is direct-fit on the bikes listed in the Fitment section. No adapter brackets, no clamp shims. If your platform isn't listed, contact our engineering team — we may have a variant in development.
Yes. We pre-install a spring sized to your weight + riding gear, and pre-tune compression / rebound damping to a sensible starting baseline. You'll be prompted at checkout.
Yes — our forks are used in EMX, Italian Enduro Cup and several Asian e-moto national series. There are no homologation requirements that disqualify them in the major series.
Yes, replacement springs are available in 0.5 N/mm increments. Use the chart above or email support@fastace.bike with your new weight for a recommendation.
24 months from purchase against manufacturing defects. Crash damage, corrosion from improper storage and modifications by unauthorised parties are not covered.
Envoyez-nous une vidéo de votre terrain et votre poids; nous répondrons avec une configuration de départ.